Engine Head

Cometic 90mm Head Gasket for Honda K-Series engines.

Cometic MLS Gaskets are comprised of multiple layers of stainless steel due to its increased strength, ability to rebound and resistance to corrosion.

The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber-based material that is heat resistant to 250°C /482°F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

The center or shim layer is uncoated stainless-steel layer which can be varied to accommodate multiple thickness requirements.

• Provide maximum sealing performance for today's high output engines and require no sealants
• Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
• No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion

Application Fitment:

Acura
02-06 Acura RSX Base 2.0 K20A3
02-04 Acura RSX Type S 2.0 K20A2
05-06 Acura RSX Type S 2.0 K20Z1
Honda
02-05 Honda Civic Si 2.0 K20A3
06-11 Honda Civic Si 2.0 K20Z3

Brand: Cometic
SKU: C14043-051
Bore: 90mm
Thickness: .051"
Compatible with: K20, K24
Condition: New

Cometic 89mm Head Gasket for Honda K-Series engines.

Cometic MLS Gaskets are comprised of multiple layers of stainless steel due to its increased strength, ability to rebound and resistance to corrosion.

The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber-based material that is heat resistant to 250°C /482°F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

The center or shim layer is uncoated stainless-steel layer which can be varied to accommodate multiple thickness requirements.

• Provide maximum sealing performance for today's high output engines and require no sealants
• Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
• No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion

Application Fitment:

Acura
02-06 Acura RSX Base 2.0 K20A3
02-04 Acura RSX Type S 2.0 K20A2
05-06 Acura RSX Type S 2.0 K20Z1
Honda
02-05 Honda Civic Si 2.0 K20A3
06-11 Honda Civic Si 2.0 K20Z3

Brand: Cometic
SKU: C4313-030
Bore: 89mm
Thickness: .030"
Compatible with: K20, K24
Condition: New

Cometic 88mm Head Gasket for Honda K-Series engines.

Cometic MLS Gaskets are comprised of multiple layers of stainless steel due to its increased strength, ability to rebound and resistance to corrosion.

The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber-based material that is heat resistant to 250°C /482°F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

The center or shim layer is uncoated stainless-steel layer which can be varied to accommodate multiple thickness requirements.

• Provide maximum sealing performance for today's high output engines and require no sealants
• Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
• No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion

Application Fitment:

Acura
02-06 Acura RSX Base 2.0 K20A3
02-04 Acura RSX Type S 2.0 K20A2
05-06 Acura RSX Type S 2.0 K20Z1
Honda
02-05 Honda Civic Si 2.0 K20A3
06-11 Honda Civic Si 2.0 K20Z3

Brand: Cometic
SKU: C4312-030
Bore: 88mm
Thickness: .030"
Compatible with: K20, K24
Condition: New

Cometic 87.5mm Head Gasket for Honda K-Series engines.

Cometic MLS Gaskets are comprised of multiple layers of stainless steel due to its increased strength, ability to rebound and resistance to corrosion.

The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber-based material that is heat resistant to 250°C /482°F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

The center or shim layer is uncoated stainless-steel layer which can be varied to accommodate multiple thickness requirements.

• Provide maximum sealing performance for today's high output engines and require no sealants
• Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
• No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion

Application Fitment:

Acura
02-06 Acura RSX Base 2.0 K20A3
02-04 Acura RSX Type S 2.0 K20A2
05-06 Acura RSX Type S 2.0 K20Z1
Honda
02-05 Honda Civic Si 2.0 K20A3
06-11 Honda Civic Si 2.0 K20Z3

Brand: Cometic
SKU: C14039-030
Bore: 87.5mm
Thickness: .030"
Compatible with: K20, K24
Condition: New

Cometic 87mm Head Gasket for Honda K-Series engines.

Cometic MLS Gaskets are comprised of multiple layers of stainless steel due to its increased strength, ability to rebound and resistance to corrosion.

The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber-based material that is heat resistant to 250°C /482°F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

The center or shim layer is uncoated stainless-steel layer which can be varied to accommodate multiple thickness requirements.

• Provide maximum sealing performance for today's high output engines and require no sealants
• Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
• No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion

Application Fitment:

Acura
02-06 Acura RSX Base 2.0 K20A3
02-04 Acura RSX Type S 2.0 K20A2
05-06 Acura RSX Type S 2.0 K20Z1
Honda
02-05 Honda Civic Si 2.0 K20A3
06-11 Honda Civic Si 2.0 K20Z3

Brand: Cometic
Bore: 87mm
Compatible with: K20, K24
Condition: New

Cometic 86.5mm Head Gasket for Honda K-Series engines.

Cometic MLS Gaskets are comprised of multiple layers of stainless steel due to its increased strength, ability to rebound and resistance to corrosion.

The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber-based material that is heat resistant to 250°C /482°F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

The center or shim layer is uncoated stainless-steel layer which can be varied to accommodate multiple thickness requirements.

• Provide maximum sealing performance for today's high output engines and require no sealants
• Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
• No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion

Application Fitment:

Acura
02-06 Acura RSX Base 2.0 K20A3
02-04 Acura RSX Type S 2.0 K20A2
05-06 Acura RSX Type S 2.0 K20Z1
Honda
02-05 Honda Civic Si 2.0 K20A3
06-11 Honda Civic Si 2.0 K20Z3

Brand: Cometic
Bore: 86.5mm
Compatible with: K20, K24
Condition: New

Cometic 86mm head gasket for Honda K-Series engines.

Cometic MLS Gaskets are comprised of multiple layers of stainless steel due to its increased strength, ability to rebound and resistance to corrosion.

The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber-based material that is heat resistant to 250°C /482°F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

The center or shim layer is uncoated stainless-steel layer which can be varied to accommodate multiple thickness requirements.

• Provide maximum sealing performance for today`s high output engines and require no sealants
• Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
• No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion

Brand: Cometic
SKU: C4300-030
Bore: 86mm
Thickness: .030"
Compatible with: K20, K24
Condition: New

• EXTREME DUTY L19 HEAD STUD KIT FOR HONDA/ACURA B & K-SERIES

  SpeedFactory Racing Extreme Duty L19 Head Stud Kit for Honda/Acura B & K Series (B18C1, B18C5, B20VTEC, LS-VTEC, K20, K24) 

  
  
  This Kit was designed for hardcore drag racers running high boost levels that need more clamping force and tensile strength than the typical 8740 chromoly studs on the market. If you are looking for the best option, you've found it as these are 25% stronger than any other available off the shelf Head Stud Kit for your Honda/Acura!
  
  These studs are manufactured specifically for us by ARP and utilize an L19 material that is much stronger than the typical 8740 chromoly and yields a tensile strength of 240-260,000 psi. They are also provisioned with a hex broach on the top of the stud for ease of installation and enabling you to install them with the cylinder head on the car if necessary. 
  
  What makes these head studs better than the competition?
  
  Initially these might look just like other ARP and A1 Technologies head studs available on the market, but that isn't the case.
  
  Superior L19 Alloy steel, much stronger than the typical 8740 chromoly. Achieve higher clamp loads of 240,000-260,000 psi as opposed to the competitions 190,000-210,000 psi rating. Hex broach on the top of the stud for ease of installation. No Modification to your cylinder head or block is required as these are a direct drop-in replacement for the OEM head studs. Recommended for applications boosting higher than 30 PSI.
  
  ·Each kit includes a complete set of L19 head studs, nuts, washers and ARP Assembly Lubricant.

  Specs:

  • L19 material - yields a tensile strength of 240-260,000 psi
  • Recommended for applications boosting higher than 30 PSI.

Brand: ARP
SKU: SF-02-001
Compatible with: Honda/Acura B-Series, K20, K24
Condition: New